This article walks you through how to install the
resetperms plug-in for OpenMediaVault (OMV). This is a very handy plug-in especially if you copy large quantities of files into or out of a remote location and need to adjust permissions. As I read this back that is an awful lot of ‘in’s.
I will take
resetperms any day of the week, as opposed to the awful kicking and screaming that inevitably occurs after I have copied tera-bytes of information only to find out that I do not have the necessary permissions to work with the files and folders on a…
What a slug-fest!
Getting down was the easy part.
We took a trip in our vehicle one cold, sunny afternoon in the spring-time; our journey took us to the bottom of a rather steep hill.
I should have known better!
The road was covered in a thick slurry of ice and snow from the tail-end of winter.
Everything was fine… until we attempted to head back up the hill.
Then the fun began. We were moving, but in the wrong direction!
Picture a skating rink. On a slope. Covered in five-thousand slushies.
Then throw in some icy grey muck just…
Wow what a difference! If you have read a couple of my other articles you may know about my adventures with file sharing on a home network.
Taking a homebrew approach at setting all this up has proven… interesting.
Not the least of which was when I figured out why syncing was so slow to the RAID on my file server. In one sentence: I needed to change
fstab. There! Article finished. Just kidding; please keep reading to learn more.
For those who may not know,
fstab is where Linux goes to get mounting options for…
In this article I walk quickly through *most* of the steps needed to set up a file server for home sharing for a DIY networked attached storage (NAS). Spoiler alert: it is very basic and uses Samba. Yes, some of you might be thinking I really ought to check out an honest-to-goodness server for NAS such as OpenMediaVault. Yes, I did in fact go that route at first but then opted to do things manually. I am a control freak. There. I said it.
Important: all of the steps in this article assume a local…
In part 1 of this article I discussed how to connect the ADS-1250W to a network. Part 2 is where I do a walk-through of how to set it up in Ubuntu.
Provided you completed all of the steps in Part 1, your Brother ADS-1250W scanner should now be connected on your network.
This article assumes you are using Ubuntu 20.04, your mileage may vary with other distributions.
Once logged into Ubuntu the first thing you should do to continue with the scanner setup is assign your scanner a fixed IP address.
Make sure your scanner is powered on for…
In this article I do a brief walk-through of a home-built Network-attached storage (NAS) device entitled ‘MaximusNAS’. You can think of it like an external hard-drive or HDD on steroids, like having your own private cloud. As opposed to an external drive, it sits on your network. Provided you have configured it correctly your NAS can be used to serve up files and folders as well as stream media. Playing music and movies is great but for my situation I opted to keep the usage limited to reading and writing files and folders.
There comes a time for every piece…
In this two-part article I walk through the steps I took to set up my Brother ADS-1250W scanner, a nifty little piece of kit for office dwellers and road warriors alike.
Step 1 — Grab a hot cup of your beverage of choice; I hope you find this article entertaining!
I purchased the Brother ADS-1250W multi-document scanner for a couple of reasons. Number one: low-cost. It was lower in price than a lot of competing products, at least at the time that I purchased it.
Second: portability. The scanner comes in a sleek package with several folding parts that make…
Clap if you are a pet owner!
We have three in our house and love them dearly.
Needless to say there are more than a couple of cat photos on one of our older computers that I wanted to move to network-attached storage. Being a bit cautious I also wanted to have a backup configured to a separate Linux server on our home network for key bits and pieces. This article is useful for setting up a Network File System (NFS) service on one Linux machine on a local network to enable file sharing between various computers.
Install NFS on…
I like taking long walks with my dog.
It gives me a much-needed chance to reflect, to get a bit of fresh air and prespective.
We are very fortunate to live close to a huge network of shared trails of varying difficulties; there is something for everyone. Lots of mountain-bikers frequent the pathways as do walkers, runners and other outdoorsey-type people.
Depending on the amount of time I want to spend I can take one of shorter, more popular loops. Or, opt for one of the longer loops like North Dogsled or PWT. …
Samba is a very handy utility for sharing files and folders on a home network. I have been using it for several years but every time I configure a new machine I have to re-trace my steps through various notes I left for myself. Not efficient at all!
Right. Time for a new article to tie all the pieces together!
In this tutorial we will be setting up Samba to use two shared folders, one to test and another for day-to-day sharing. You will want to change items marked with
<..> to suit your particular situation. We will also be…